검색결과
-
[특집-기술위원회] TC 210 - 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 210 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices)과 관련된 기술위원회는 1994년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 아미르 어바우탈레브(Mr Amir Aboutaleb)가 책임지고 있다. 현재 의장은 스콧 A. 콜번(Mr Scott A. Colburn)이며 임기는 2025년말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 액체 및 가스용 커넥터를 포함하는 건강 목적의 제품에 대한 품질 관리 및 상응하는 일반적인 측면과 관련한 분야의 요구 사항 및 지침에 관한 표준화다.단, △ISO/TC 176에서 다루는 일반 품질 관리 표준 △의약품 및 의료 서비스에 대한 품질 관리 표준은 제외한다.참고로 건강 목적의 제품에는 의료 기기, 인접 제품(또는 액세서리라고도 할 수 있음) 및 의료 기기와 유사한 위험 프로필을 가진 제품을 포함해 건강과 관련된 사용을 위한 제품이 포함된다.현재 ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준은 30개며 ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준은 13개다. 참여하고 있는 회원은 39개국, 참관 회원은 28개국이다.□ ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준 30개 중 15개 목록▷ISO 13485:2016 Medical devices — Quality management systems — Requirements for regulatory purposes▷ISO 14971:2019 Medical devices — Application of risk management to medical devices▷ISO 15223-1:2021 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements▷ISO 15223-2:2010 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO 18250-1:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 1: General requirements and common test methods▷ISO 18250-3:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-6:2019 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 6: Neural applications▷ISO 18250-7:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 7: Connectors for intravascular infusion▷ISO 18250-8:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications▷ISO/TR 20416:2020 Medical devices — Post-market surveillance for manufacturers▷ISO 20417:2021 Medical devices — Information to be supplied by the manufacturer▷ISO/TR 24971:2020 Medical devices — Guidance on the application of ISO 14971▷IEC 62304:2006 Medical device software — Software life cycle processes▷IEC 62304:2006/Amd 1:2015 Medical device software — Software life cycle processes — Amendment 1▷IEC 62366-1:2015 Medical devices — Part 1: Application of usability engineering to medical devices□ ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준 13개 목록▷ISO/WD TS 5137 Medical device maintenance management for healthcare delivery organizations▷ISO 15223-1:2021/AWI Amd 1 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements — Amendment 1▷ISO/AWI 15223-2 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO/AWI 18250-3 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-8:2018/AWI Amd 1 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications — Amendment 1▷ISO/CD 20417 Medical devices — Information to be supplied by the manufacturer▷ISO/AWI 23421 Medical devices — Terminology — Terms used in the field of quality management and corresponding general aspects for products with a health purpose including medical devices▷ISO/CD TS 24971-2 Medical devices — Guidance on the application of ISO 14971 — Part 2: Machine learning in artificial intelligence▷ISO/DIS 80369-1 Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements▷ISO/FDIS 80369-2 Small-bore connectors for liquids and gases in healthcare applications — Part 2: Connectors for respiratory applications▷IEC/AWI 80369-5 Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb cuff inflation applications▷ISO/DIS 80369-6 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neural applications▷ISO/FDIS 80369-20 Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods
-
[특집-기술위원회] TC 207 - 환경경영(Environmental management)… 사무국은 캐나다 표준위원(SCC)에서 맡아스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 등이 있다.ISO/TC 207 환경경영(Environmental management)과 관련된 기술위원회는 1993년 결성됐다. 사무국은 캐나다 표준위원(Standards Council of Canada, SCC)에서 맡고 있다. 부의장은 다니엘 트릴로스(Mr Daniel Trillos)로 2024년까지 임기를 맡고 있다.위원회는 크리스틴 게라티(Mrs Christine Geraghty)가 책임지고 있다. 현재 의장은 자키아 카삼(Ms Zakiah Kassam)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 호세 알코르타(Mr José Alcorta), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등이다.범위는 지속가능한 개발을 지원하기 위해 관련된 사회적, 경제적 측면을 포함해 환경 및 기후 영향을 다루기 위한 환경경영 분야의 표준화다. 단, 오염물질 시험방법, 환경성능 한계치 및 수준 설정, 제품 표준화 등은 제외한다.참고로 TC 207은 환경경영시스템, 감사, 검증/확인, 관련 조사, 환경 라벨링, 환경 성능 평가, 수명주기 평가, 기후 변화 및 완화와 적응, 에코디자인, 재료 효율성 환경 경제, 환경 및 기후 금융 등에 초점을 맞추고 있다. 적절한 경우 ISO/TC 207은 환경 경영을 지원할 수 있는 주제에 관해 기존 위원회와 협력해 작업하게 된다.현재 ISO/TC 207 사무국과 관련해 발행된 표준은 69개며 ISO/TC 207 사무국의 직접적인 책임 하에 발행된 표준은 3개다. ISO/TC 207 사무국과 관련해 개발 중인 표준은 21개다. 참여하고 있는 회원은 79개국, 참관 회원은 45개국이다.□ ISO/TC 207 사무국의 직접적인 책임 하에 발행된 표준 69개 중 3개 목록▷ISO Guide 64:2008 Guide for addressing environmental issues in product standards▷ISO 14050:2020 Environmental management — Vocabulary▷IEC 62430:2019 Environmentally conscious design (ECD) — Principles, requirements and guidance□ ISO/TC 207 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 207/SC 1 Environmental management systems ; 발행된 표준 13개, 개발 중인 표준 5개▷ISO/TC 207/SC 2 Environmental auditing and related practices ; 발행된 표준 3개, 개발 중인 표준 3개▷ISO/TC 207/SC 3 Environmental labelling ; 발행된 표준 8개, 개발 중인 표준 3개▷ISO/TC 207/SC 4 Environmental performance evaluation ; 발행된 표준 9개, 개발 중인 표준 1개▷ISO/TC 207/SC 5 Life cycle assessment ; 발행된 표준 16개, 개발 중인 표준 5개▷ISO/TC 207/SC 7 Greenhouse gas and climate change management and related activities ; 발행된 표준 17개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 156 - 금속 및 합금의 부식(Corrosion of metals and alloys)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 156 금속 및 합금의 부식(Corrosion of metals and alloys)과 관련된 기술위원회는 1974년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 호우 지에(Mrs Jie Hou)이 책임지고 있다. 현재 의장은 평 챠오(Mr Chao Feng)로 임기는 2025년까지다. ISO 기술 프로그램 관리자는 추 주안우(Ms Chuanyu Zou), ISO 편집 관리자는 엔 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 부식 테스트 방법, 부식 방지 방법 및 부식 제어 엔지니어링 수명주기를 포함한 금속 및 합금 부식 분야의 표준화다. ISO 내에서 이러한 분야의 활동에 대한 일반적인 조정자 역할도 수행한다.현재 ISO/TC 156 사무국과 관련해 발행된 표준은 118개며 직접적인 책임 하에 발행된 표준은 114개다. ISO/TC 156 사무국과 관련해 개발 중인 표준은 28개며 직접적인 책임하에 개발중인 표준은 26개다. 참여하고 있는 회원은 24개국, 참관 회원은 26개국이다.□ ISO/TC 156 사무국의 직접적인 책임 하에 발행된 표준 114개 중 15개 목록▷ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions▷ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)▷ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid▷ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels▷ISO 4212:2023 Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel▷ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions▷ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions▷ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures▷ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts▷ISO 5156:2022 Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method▷ISO 5668:2023 Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water▷ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method▷ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria▷ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements▷ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests □ ISO/TC 156 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 5929 Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments▷ISO/DIS 7054 Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment▷ISO 7539-6:2018/DAmd 1 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1▷ISO/DIS 8044 Corrosion of metals and alloys — Vocabulary▷ISO 8407:2021/CD Amd 1 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1▷ISO/TR 8547 Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region▷ISO/AWI TR 8564 Corrosion of metals and alloys — Reference data for ISO16539 Method B▷ISO 9227:2022/DAmd 1 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of warning▷ISO/CD 9350 Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure▷ISO/DIS 9351 Galvanic anodes for cathodic protection in seawater and saline sediments▷ISO/DIS 9812 Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method▷ISO 10062:2022/DAmd 1 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of warning▷ISO/CD TR 11303 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion▷ISO 11782-2:1998/DAmd 1 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1▷ISO/AWI 16364 Guidelines for Galvanic Corrosion Control□ ISO/TC 156 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 156/SC 1 Corrosion control engineering life cycle : 발행된 표준 4개, 개발 중인 표준 2개
-
KTR, 수소얼라이언스와 청정수소 인증 및 수소 산업 발전 이끈다KTR(한국화학융합시험연구원, 원장 김현철)이 수소융합언라이언스와 손을 잡았다. 내년에 도입될 청정수소 인증에 대비하고 국내 수소산업 활성화를 도모할 예정이다. KTR 김현철 원장은 1일(수) 서울 서초 수소융합얼라이언스 회의실에서 문재도 회장과 청정수소 인증 인프라 구축 및 수소 인증 분야 협력 확대를 위한 상호 업무협약을 체결했다. 수소융합얼라이언스는 정부와 업계가 수소 산업을 활성화하기 위해 2017년 출범한 민관협의체로 수소에너지 확산, 관련 산업 육성, 국제협력 확대, 정책수립 및 법 제정 지원 등의 사업을 수행하고 있다. 협약에 따라 KTR은 수소융합얼라이언스와 청정수소 인증에 필요한 LCI(Life Cycle Inventory, 전 과정 목록자료) DB 구축에 함께 나선다. 수소 생산과정에서 사용되는 각각의 원료 등 수소 제조에 직접 사용되는 DB 구축은 24년 청정수소 인증제도 시행에 따라 마련되어야 하는 중요한 항목 중 하나다. 청정수소 인증제도는 수소를 생산하거나 수입하는 등의 과정에서 온실가스 배출량이 일정 수준 이하임을 인증하고 인센티브를 지원하는 제도이다. 산업부는 지난 4월 「청정수소 인증제 설명회」를 개최하고 2024년 인증제도 시행을 예고한 바 있다. * 산업통상자원부 ‘청정수소 인증, 첫걸음 내딛다’ 보도자료 (2023.04.17.) 이번 업무협약을 바탕으로 청정수소를 둘러싼 인증 동향 및 정보 교환과 더불어, 인증 제도의 신뢰성을 함께 확보해 나가며 지속가능한 탄소중립에 기여할 것으로 보인다.
-
[기획-디지털 ID 표준] ⑮산업단체와 포럼 - 오픈ID(OpenID)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.산업단체와 포럼은 공식적으로 표준화 조직으로 간주되지 않지만 디지털 ID 영역을 포함한 특정 영역에서는 사실상의 표준을 제공하고 있다.몇몇의 경우 이들 단체들이 추가 비준을 위해 자신들이 생산한 사양을 ISO/IEC, ITU 통신 표준화 부문(ITU-T), ETSI 등 표준 기관에 제출할 수 있다.이러한 산업단체 및 포럼에는 △인증기관브라우저 포럼(Certification Authority Browser Forum, CA/Browser Forum) △클라우드 서명 컨소시엄(Cloud Signature Consortium, CSC) △국제자금세탁방지기구(Financial Action Task Force, FATF) △신속온라인인증(Fast Identity Online, FIDO) △국제인터넷표준화기구(Internet Engineering Task Force, IETF) △구조화 정보 표준 개발기구(오아시스)(Organization for the Advancement of Structured Information Standards, OASIS) △오픈ID(OpenID) △SOG-IS(Senior Officials Group-Information Systems Security) △W3C(World Wide Web Consortium) 등이다.오픈ID(OpenID)는 개인 및 기업의 비영리 국제 표준화 조직으로 OpenID(개방형 표준 및 분산 인증 프로토콜)를 활성화, 홍보, 보호하기 위해 노력하고 있다.오픈ID 코넥트 코어(OpenID Connect Core)는 핵심 OpenID 기능을 정의하고 있다. OpenID 기능은 OAuth 2.0 기반에 구축된 인증과 최종 사용자에 대한 정보를 전달하기 위한 클레임의 사용이다. 추가적인 기술 사양 문서는 검증 가능한 자격 증명 및 검증 가능한 프리젠테이션의 발급을 확장하기 위해 작성됐다. 또한 OpenID Connect 사용에 대한 보안 및 개인 정보 보호 고려 사항에 대해 설명하고 있다.아래는 오픈ID가 발행한 'OpenID Connect Core 1.0 incorporating errata set 1' 목차 내용이다.■ 목차(Table of Contents)1. Introduction1.1. Requirements Notation and Conventions1.2. Terminology1.3. Overview2. ID Token3. Authentication3.1. Authentication using the Authorization Code Flow3.1.1. Authorization Code Flow Steps3.1.2. Authorization Endpoint3.1.2.1. Authentication Request3.1.2.2. Authentication Request Validation3.1.2.3. Authorization Server Authenticates End-User3.1.2.4. Authorization Server Obtains End-User Consent/Authorization3.1.2.5. Successful Authentication Response3.1.2.6. Authentication Error Response3.1.2.7. Authentication Response Validation3.1.3. Token Endpoint3.1.3.1. Token Request3.1.3.2. Token Request Validation3.1.3.3. Successful Token Response3.1.3.4. Token Error Response3.1.3.5. Token Response Validation3.1.3.6. ID Token3.1.3.7. ID Token Validation3.1.3.8. Access Token Validation3.2. Authentication using the Implicit Flow3.2.1. Implicit Flow Steps3.2.2. Authorization Endpoint3.2.2.1. Authentication Request3.2.2.2. Authentication Request Validation3.2.2.3. Authorization Server Authenticates End-User3.2.2.4. Authorization Server Obtains End-User Consent/Authorization3.2.2.5. Successful Authentication Response3.2.2.6. Authentication Error Response3.2.2.7. Redirect URI Fragment Handling3.2.2.8. Authentication Response Validation3.2.2.9. Access Token Validation3.2.2.10. ID Token3.2.2.11. ID Token Validation3.3. Authentication using the Hybrid Flow3.3.1. Hybrid Flow Steps3.3.2. Authorization Endpoint3.3.2.1. Authentication Request3.3.2.2. Authentication Request Validation3.3.2.3. Authorization Server Authenticates End-User3.3.2.4. Authorization Server Obtains End-User Consent/Authorization3.3.2.5. Successful Authentication Response3.3.2.6. Authentication Error Response3.3.2.7. Redirect URI Fragment Handling3.3.2.8. Authentication Response Validation3.3.2.9. Access Token Validation3.3.2.10. Authorization Code Validation3.3.2.11. ID Token3.3.2.12. ID Token Validation3.3.3. Token Endpoint3.3.3.1. Token Request3.3.3.2. Token Request Validation3.3.3.3. Successful Token Response3.3.3.4. Token Error Response3.3.3.5. Token Response Validation3.3.3.6. ID Token3.3.3.7. ID Token Validation3.3.3.8. Access Token3.3.3.9. Access Token Validation4. Initiating Login from a Third Party5. Claims5.1. Standard Claims5.1.1. Address Claim5.1.2. Additional Claims5.2. Claims Languages and Scripts5.3. UserInfo Endpoint5.3.1. UserInfo Request5.3.2. Successful UserInfo Response5.3.3. UserInfo Error Response5.3.4. UserInfo Response Validation5.4. Requesting Claims using Scope Values5.5. Requesting Claims using the "claims" Request Parameter5.5.1. Individual Claims Requests5.5.1.1. Requesting the "acr" Claim5.5.2. Languages and Scripts for Individual Claims5.6. Claim Types5.6.1. Normal Claims5.6.2. Aggregated and Distributed Claims5.6.2.1. Example of Aggregated Claims5.6.2.2. Example of Distributed Claims5.7. Claim Stability and Uniqueness6. Passing Request Parameters as JWTs6.1. Passing a Request Object by Value6.1.1. Request using the "request" Request Parameter6.2. Passing a Request Object by Reference6.2.1. URL Referencing the Request Object6.2.2. Request using the "request_uri" Request Parameter6.2.3. Authorization Server Fetches Request Object6.2.4. "request_uri" Rationale6.3. Validating JWT-Based Requests6.3.1. Encrypted Request Object6.3.2. Signed Request Object6.3.3. Request Parameter Assembly and Validation7. Self-Issued OpenID Provider7.1. Self-Issued OpenID Provider Discovery7.2. Self-Issued OpenID Provider Registration7.2.1. Providing Information with the "registration" Request Parameter7.3. Self-Issued OpenID Provider Request7.4. Self-Issued OpenID Provider Response7.5. Self-Issued ID Token Validation8. Subject Identifier Types8.1. Pairwise Identifier Algorithm9. Client Authentication10. Signatures and Encryption10.1. Signing10.1.1. Rotation of Asymmetric Signing Keys10.2. Encryption10.2.1. Rotation of Asymmetric Encryption Keys11. Offline Access12. Using Refresh Tokens12.1. Refresh Request12.2. Successful Refresh Response12.3. Refresh Error Response13. Serializations13.1. Query String Serialization13.2. Form Serialization13.3. JSON Serialization14. String Operations15. Implementation Considerations15.1. Mandatory to Implement Features for All OpenID Providers15.2. Mandatory to Implement Features for Dynamic OpenID Providers15.3. Discovery and Registration15.4. Mandatory to Implement Features for Relying Parties15.5. Implementation Notes15.5.1. Authorization Code Implementation Notes15.5.2. Nonce Implementation Notes15.5.3. Redirect URI Fragment Handling Implementation Notes15.6. Compatibility Notes15.6.1. Pre-Final IETF Specifications15.6.2. Google "iss" Value15.7. Related Specifications and Implementer's Guides16. Security Considerations16.1. Request Disclosure16.2. Server Masquerading16.3. Token Manufacture/Modification16.4. Access Token Disclosure16.5. Server Response Disclosure16.6. Server Response Repudiation16.7. Request Repudiation16.8. Access Token Redirect16.9. Token Reuse16.10. Eavesdropping or Leaking Authorization Codes (Secondary Authenticator Capture)16.11. Token Substitution16.12. Timing Attack16.13. Other Crypto Related Attacks16.14. Signing and Encryption Order16.15. Issuer Identifier16.16. Implicit Flow Threats16.17. TLS Requirements16.18. Lifetimes of Access Tokens and Refresh Tokens16.19. Symmetric Key Entropy16.20. Need for Signed Requests16.21. Need for Encrypted Requests17. Privacy Considerations17.1. Personally Identifiable Information17.2. Data Access Monitoring17.3. Correlation17.4. Offline Access18. IANA Considerations18.1. JSON Web Token Claims Registration18.1.1. Registry Contents18.2. OAuth Parameters Registration18.2.1. Registry Contents18.3. OAuth Extensions Error Registration18.3.1. Registry Contents19. References19.1. Normative References19.2. Informative ReferencesAppendix A. Authorization ExamplesA.1. Example using response_type=codeA.2. Example using response_type=id_tokenA.3. Example using response_type=id_token tokenA.4. Example using response_type=code id_tokenA.5. Example using response_type=code tokenA.6. Example using response_type=code id_token tokenA.7. RSA Key Used in ExamplesAppendix B. AcknowledgementsAppendix C. Notices§ Authors' Addresses
-
[특집-ISO/IEC JTC 1/SC 17 활동] ⑩Result of voting and comments received on ISO/IEC FDIS 24789-2 Document 소개지난 10월16일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting and comments received on ISO/IEC FDIS 24789-2' 관련된 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다. 배포된 문서는 'Result of voting and comments received on ISO/IEC FDIS 24789-2'관련된 투표 정보 및 결과와 관련돼 있다.ISO/IEC 24789-2 표준 프로젝트로 'ISO/IEC FDIS 24789-2 (Ed 2) Identification cards — Card service life — Part 2: Methods of evaluation'에 대해 투표한 내용이다. P-Members 18개국이 참여해 18개국(100%) 모두 찬성해 66.66%이상 찬성을 받아 승인됐다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] ⑨Result of voting and comments received on ISO/IEC FDIS 24789-1 소개지난 10월16일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting and comments received on ISO/IEC FDIS 24789-1' 관련된 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다. 배포된 문서는 'Result of voting and comments received on ISO/IEC FDIS 24789-1'관련된 투표 정보 및 결과와 관련돼 있다.ISO/IEC 24789-1 표준 프로젝트로 ISO/IEC FDIS 24789-1 (Ed 2) Identification cards — Card service life — Part 1: Application profiles and requirements에 대해 투표한 내용이다. P-Members 18개국이 참여해 18개국(100%) 모두 찬성해 66.66%이상 찬성을 받아 승인됐다.
-
[특집-기술위원회] TC 131 - 유체동력시스템(Fluid power systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 131 유체동력시스템(Fluid power systems)과 관련된 기술위원회는 TC 130과 마찬가지로 1969년에 결성됐다. 사무국은 미국 국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 앨리슨 포사이드(Mrs Allison Forsythe)가 책임지고 있다. 현재 의장은 이반 셰필드(Mr Ivan Sheffield)로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 ISO 편집팀(ISO Editing Team) 등으로 조사됐다.범위는 용어, 구성, 주요 치수, 안전 요구 사항, 테스트 및 검사 방법으로 구성된 유체 동력 시스템 및 구성 요소 분야의 표준화다.TC 131 표준화에 다음과 같은 구성 요소들이 포함된다. △어큐뮬레이터 △압축 공기 건조기 △도체(단단하고 유연한) △실린더 △전기 유압 및 전기 공압 구성 요소와 시스템 △피팅 △유체 장치 △호스 피팅 및 어셈블리 △필터 및 분리기 △유체 △유압 펌프 △모터 △가동부 유체 제어 장치 △공압 윤활 장치 △조절기 △퀵 액션 커플링 △저장소 △밀봉 장치 △밸브 등이다.현재 ISO/TC 131 사무국과 관련해 발행된 표준은 237개며 ISO/TC 131 사무국의 직접적인 책임 하에 발행된 표준은 10개다. ISO/TC 130 사무국과 관련해 개발 중인 표준은 20개다. 참여하고 있는 회원은 16개국, 참관 회원은 19개국이다.□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 10개 목록▷ISO 2944:2000 Fluid power systems and components — Nominal pressures▷ISO 5352-1:2023 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method▷ISO/TR 10946:2019 Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports▷ISO/TR 16194:2017 Pneumatic fluid power — Assessment of component reliability by accelerated life testing — General guidelines and procedures▷ISO 19973-1:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures▷ISO 19973-2:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves▷ISO 19973-2:2015/Amd 1:2019 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves — Amendment 1▷ISO 19973-3:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod▷ISO 19973-4:2014 Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators▷ISO 19973-5:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves□ ISO/TC 131 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 131/SC 1 Symbols, terminology and classifications ; 발행된 표준 7개, 개발 중인 표준 1개▷ISO/TC 131/SC 2 Pumps, motors and integral transmissions ; 발행된 표준 5개, 개발 중인 표준 0개▷ISO/TC 131/SC 3 Cylinders ; 발행된 표준 24개, 개발 중인 표준 1개▷ISO/TC 131/SC 4 Connectors and similar products and components ; 발행된 표준 50개, 개발 중인 표준 2개▷ISO/TC 131/SC 5 Control products and components ; 발행된 표준 50개, 개발 중인 표준 4개▷ISO/TC 131/SC 6 Contamination control ; 발행된 표준 38개, 개발 중인 표준 5개▷ISO/TC 131/SC 7 Sealing devices ; 발행된 표준 27개, 개발 중인 표준 2개▷ISO/TC 131/SC 8 Product testing ; 발행된 표준 22개, 개발 중인 표준 4개▷ISO/TC 131/SC 9 Installations and systems ; 발행된 표준 4개, 개발 중인 표준 1개□ ISO/TC 131 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 131/WG 1 Accumulators▷ISO/TC 131/WG 4 Determination of the reliability of pneumatic components by testing
-
[특집-공동기술위원회] ⑥ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering) - 워킹그룹(WG) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 약 2만 명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2, SC 6에 이어 SC 7에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering)과 관련된 분과위원회는 1987년 결성됐다. 사무국은 인도 표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 레나 가르그(Ms Reena Garg)이 책임지고 있다. 현재 의장은 선딥 오베로이(Dr Sundeep Oberoi)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다.범위는 소프트웨어 제품 및 시스템 엔지니어링을 위한 프로세스, 지원 도구 및 지원 기술의 표준화다. 참고로 프로세스, 도구 및 기술은 JTC 1 참조 약관의 범위 내에 있으며 JTC 1이 다른 SC에 할당한 특정 도구 및 기술은 제외된다.현재 ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임 하에 발행된 표준은 212개며 개발 중인 표준은 41개다. 참여하고 있는 회원은 37개국, 참관 회원은 24개국이다.□ ISO/IEC JTC 1/SC 7 사무국내 작업그룹(Working Group, WG) 목록▷ISO/IEC JTC 1/SC 7/AG 1 Chair’s Advisory Group Working group▷ISO/IEC JTC 1/SC 7/AG 2 Business planning group Working group▷ISO/IEC JTC 1/SC 7/AG 3 Communications and outreach Working group▷ISO/IEC JTC 1/SC 7/AG 4 Standards management Working group▷ISO/IEC JTC 1/SC 7/AG 5 Architecture and future watch Working group▷ISO/IEC JTC 1/SC 7/AHG 6 Digital engineering Working group▷ISO/IEC JTC 1/SC 7/AHG 7 Open source software Working group▷ISO/IEC JTC 1/SC 7/AHG 9 AI-based software development Working group▷ISO/IEC JTC 1/SC 7/AHG 10 Green software Working group▷ISO/IEC JTC 1/SC 7/JWG 28 Joint ISO/IEC JTC 1/SC 7 - ISO/TC 159/SC 4 WG: Common industry formats for usability-related information Working group▷ISO/IEC JTC 1/SC 7/WG 2 System software documentation Working group▷ISO/IEC JTC 1/SC 7/WG 4 Tools and environment Working group▷ISO/IEC JTC 1/SC 7/WG 6 Software Product and System Quality Working group▷ISO/IEC JTC 1/SC 7/WG 7 Life cycle management Working group▷ISO/IEC JTC 1/SC 7/WG 10 Process assessment Working group▷ISO/IEC JTC 1/SC 7/WG 19 Techniques for Specifying IT Systems Working group▷ISO/IEC JTC 1/SC 7/WG 20 Software and systems bodies of knowledge and professionalization Working group▷ISO/IEC JTC 1/SC 7/WG 21 Information technology asset management Working group▷ISO/IEC JTC 1/SC 7/WG 22 Vocabulary validation Working group▷ISO/IEC JTC 1/SC 7/WG 24 Systems and software standards for Very Small Entities Working group▷ISO/IEC JTC 1/SC 7/WG 26 Software testing Working group▷ISO/IEC JTC 1/SC 7/WG 29 Agile and DevOps Working group▷ISO/IEC JTC 1/SC 7/WG 30 Systems resilience Working group▷ISO/IEC JTC 1/SC 7/WG 42 Architecture Working group□ 다른 위원회의 책임하에 있는 공동 작업그룹 목록▷ISO/IEC JTC 1/SC 42/JWG 2 Joint Working Group ISO/IEC JTC1/SC 42 - ISO/IEC JTC1/SC 7 : Testing of AI-based systems▷ISO/TC 159/SC 4/JWG 28 Joint ISO/TC 159/SC 4 - ISO/IEC JTC 1/SC 7 WG: Common industry formats for usability related information
-
[특집-공동기술위원회] ⑥ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering) 소개 - 1스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만 명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공한다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축한다. 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2, SC 6에 이어 SC 7에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering)과 관련된 분과위원회는 1987년 결성됐다. 사무국은 인도 표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 레나 가르그(Ms Reena Garg)이 책임지고 있다. 현재 의장은 선딥 오베로이(Dr Sundeep Oberoi)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다.범위는 소프트웨어 제품 및 시스템 엔지니어링을 위한 프로세스, 지원 도구 및 지원 기술의 표준화다. 참고로 프로세스, 도구 및 기술은 JTC 1 참조 약관의 범위 내에 있으며 JTC 1이 다른 SC에 할당한 특정 도구 및 기술은 제외된다.현재 ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임 하에 발행된 표준은 212개며 개발 중인 표준은 41개다. 참여하고 있는 회원은 37개국, 참관 회원은 24개국이다.□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 212개 중 15개 목록▷ISO 5806:1984 Information processing — Specification of single-hit decision tables▷ISO 5807:1985 Information processing — Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts▷ISO/IEC TR 7052:2023 Software engineering — Controlling frequently occurring risks during development and maintenance of custom software▷ISO/IEC 8631:1989 Information technology — Program constructs and conventions for their representation▷ISO 8790:1987 Information processing systems — Computer system configuration diagram symbols and conventions▷ISO 8807:1989 Information processing systems — Open Systems Interconnection — LOTOS — A formal description technique based on the temporal ordering of observational behaviour▷ISO/IEC TR 10000-1:1998 Information technology — Framework and taxonomy of International Standardized Profiles — Part 1: General principles and documentation framework▷ISO/IEC 10746-1:1998 Information technology — Open Distributed Processing — Reference model: Overview — Part 1:▷ISO/IEC 10746-2:2009 Information technology — Open distributed processing — Reference model: Foundations — Part 2:▷ISO/IEC 10746-3:2009 Information technology — Open distributed processing — Reference model: Architecture — Part 3:▷ISO/IEC 10746-4:1998 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4:▷ISO/IEC 10746-4:1998/Amd 1:2001 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4: — Amendment 1: Computational formalization▷ISO/IEC 11411:1995 Information technology — Representation for human communication of state transition of software▷ISO/IEC TR 12182:2015 Systems and software engineering — Framework for categorization of IT systems and software, and guide for applying it▷ISO/IEC/IEEE 12207-2:2020 Systems and software engineering — Software life cycle processes — Part 2: Relation and mapping between ISO/IEC/IEEE 12207:2017 and ISO/IEC 12207:2008□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 41개 중 15개 목록▷ISO/IEC CD 9837-1 Software and systems engineering — Systems resilience — Part 1: Concepts and vocabulary▷ISO/IEC/IEEE 15026-3 Systems and software engineering — Systems and software assurance — Part 3: System integrity levels▷ISO/IEC CD 19770-5 Information technology — IT asset management — Part 5: Overview and vocabulary▷ISO/IEC PRF 19770-6 Information technology — IT asset management — Part 6: Hardware identification tag▷ISO/IEC CD TS 19770-10 Information technology — IT asset management — Part 10: Guidance for implementing ITAM▷ISO/IEC CD 20582 Software and systems engineering — Capabilities of build and deployment tools▷ISO/IEC AWI TR 24586-1 Software and systems engineering — Agile and DevOps principles and practices — Part 1: Agile principles and practices▷ISO/IEC AWI TR 24586-2 Software and systems engineering — Agile and DevOps principles and practices — Part 2: DevOps principles and practices▷ISO/IEC/IEEE FDIS 24748-1 Systems and software engineering — Life cycle management — Part 1: Guidelines for life cycle management▷ISO/IEC/IEEE FDIS 24748-2 Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes)▷ISO/IEC DIS 24773-2 Software and systems engineering — Certification of software and systems engineering professionals — Part 2: Guidance regarding description of knowledge, skills, and competencies contained in schemes▷ISO/IEC DIS 25002 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality models overview and usage▷ISO/IEC FDIS 25010 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Product quality model▷ISO/IEC PRF 25019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality-in-use model▷ISO/IEC DIS 25040 Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Quality evaluation framework